KP-1299

Add to Wishlist
Compare
Category:
  • Description

Features

12.1” Color LCD GPS Plotter/compatible with C-MAP MAX

1. High resolution TFT day-view LCD display
2. SD-cards slot for C-Map MAX and user data
3. C-Map MAX and K-Chart Selectable
4. Tide table
5. Versatile display mode include
• Plotter Screen
• Nav.Data
• Satellite Information
• AIS Display
• Compass Screen
6. GOTO track navigation
7. Map orientation select
8. Proximity waypoints alarms
9. Perspective View
10. Palette
• Normal
• Daylight – exposed to sunlight
• Night – in dark environment
• NOAA- paper chart colors

Specifications

PLOTTER CHARACTERISTICS
1. Waypoints/icons15,000 waypoints with name, symbol, 10 proximity waypoint
2. Routeswaypoint up to 200 points each, plus MOB and Track Navigation or Goto Track modes
3. Tracks30,000 point automatic track log; 15 saved track (up to 2000 track points each) let you retrace your path in both directions
4. AlarmsXTE, Anchor drag, arrival, speed, voltage, proximity waypoint and time, AIS alarm.
5. Pallete1. Normal
2. Daylight exposed to sunlight
3. Night in dark environment
4. NOAA paperchart colors
6. TidesTide data
7. ProjectionMercator projection
8. Position formatLat/Lon
9. BasemapBuilt-in Onwa K-Chart
10. External MapSD Cards slot for C-Map MAX
11. User data storageInternal backup of user settings, or external SD-card
12. Plot Interval1s to 99h or 0.01 nm to 9.99nm
13. Plotting scales0.01nm to 1,000nm
14. Nav Data Inputs:$–BWC, $–BWR, $–DBT, $–DPT,$–GGA, $–GLL,
$–HDG,$–HDM,$–HDT,$–MDA, $–MTW,$–RMA,
$–RMB, $–RMC, $–TLL,$–TTM,$–VDR, $–VHW
Outputs:
$–AAM, $–APB, $–BOD,$–BWC,$–GGA, $–GLL,
$–RMB,$–RMC,$–VTG, $–XTE, $–ZDA
Outputs for autopilot:
$–AAM, $–APB, $–BOD,$–VTG
15. Perspective ViewOn/off

POWER SUPPLY
10.5 to 35VDC, current drain <600mA at 12V

PHYSICAL
1. Size363.8mm(H)X267.9mm(W)X106mm(D)
2. Weight3.95kg
3. Display12.1-inches ColorTFT day-view LCD 800 X 600 pixels
4. WaterproofingDisplay unit: IPX5
Antenna unit: IPX6
5. Temperature range
Display unit: -15℃ to +55℃
Antenna unit: -25℃ to +70℃

GPS RECEIVER CHARACTERISTICS
1. Receiver50 parallel channel GPS receiver continuously Tracks and uses up to 50 satellites to compute and update your position
2. Acquisition timesCold start: 27 seconds average
Warm start: 27 seconds average
Hot start: 1 seconds average
3. Update rate1/second,continuous
4. AccuracyPosition: 2.5 meters(95%) without S/A
Velocity: 0.1 Meter/sec without S/A
Time: ±100ns synchronized to GPS time
5. DynamicsAltitude: 50,000m Max
Velocity: 500 m/s
Acceleration: 4g Max
6. DatumWGS 84 & Others
7. InterfacesNMEA 0183 input and output,RS232 and RS422 output
8. AntennaKA07

AIS INTERFACE 
1. Data inputNMEA 0183 , RS232 or RS422
2. Baud rate 38,400

[table “130” not found /]

EQUIPMENT LIST
EQUIPMENT LIST
1. Display unit
2. Antenna unit with 10m cable
3. Operation manual
4. Installation materials and standard spare parts

faqs

FREQUENTLY ASKED QUESTIONS

1. How will I know if my KP-1299, or any other KP-XX99 Plotter series, is updated or not?
A: The latest firmware version available for our GPS Plotters is 16.06.14. Compare this to the firmware version of your GPS Plotter to know if it is updated or not.

2. How will I know the version of my GPS Plotter?
A: After turning your GPS Plotter “ON”, a window will be displayed containing a warning message about C-Map and K-Chart Electronic Charting Systems. On the bottom-left side of the window, the Software version of the unit will be displayed and on the bottom-right side of the window, the K-Chart version of the unit will be displayed.

3. Why is the AIS screen missing after the installation of the new firmware?
A : Starting from the new firmware update, we put the AIS screen “ON”/”OFF” selection in the SETUP menu. The default setting for the AIS screen is “OFF” therefore, you need to turn the AIS screen “ON” in the SETUP menu.
How to install or update new firmware?
A : To download the firmware update instruction, please click on the link. Firmware updating procedure on 99 series
How to switch “OFF” the unit if the system hangs in some cases?
A : Press and hold [POWER] key for about 10 seconds, then the unit will turn “OFF”.

Firmware Update

Note:From time to time, ONWA introduces new features and finds ways on how to improve the functions of your GPS Plotters. This firmware update will improve the performance of your GPS Plotter. Please read the following instructions carefully before doing the firmware update.

Latest Firmware Version: 16.06.14

Before we get started, please read the firmware updating procedure by clicking the link below:
Firmware Update Procedure

Firmware Update Procedure

To start your download, please click the link below:
Download

KP-1299 06/14/2016 update

Tips about your Plotter:

A) It is advised to switch off the unit when changing the C-MAP card.

B) It is advised to save all user data (waypoint, route etc.) before upgrade by copying them into a SD card.
Go to MAIN MENU-> Data -> Data out. After upgrade you can copy them back to the unit.
Go to MAIN MENU-> Data -> Data in.

C) For the 99A series (KP6299A, KP8299A & KP1299A):

Please switch “ON” the AIS screen after upgrade, MAIN MENU->Setup->AIS screen->”ON”.
Please turn “ON” AIS TX after upgrade, MENU-AIS->AIS TX-> “ON”.
Please check the own ship MMSI on the first row of AIS detial list, MENU-AIS->AIS detail list. If the MMSI is all “0” please re-enter the MMSI from AIS SET UP screen.
To enter the AIS SET UP screen:
i. Switch off the unit.
ii. Switch on the unit again.
iii. Press and hold [MENU] + [ESC] at the same time when you see the WARNING page.
iv. Then enter the AIS SET UP screen, choose “READ” to read the AIS data.
v. If the “Read fail! Try again” message appears, please change AIS model to “2” and choose “READ” again to read AIS data.
You can also study this link from youtube for detail : http://youtu.be/ievl784z6HM.

What’s new:

In this firmware version, the following features are added to your plotter:

Add decimal number to Depth value when in dual screen mode
( Plotter / Fish finder) Remark : when the value is over 100, the decimal number is disappear)
Enlarged the Depth value display size in fish finder screen
Replace long press MENU key to activate Track on/off by Screen Ratio setting when in dual screen mode.
Remark: Please remove the previous integrate 623 smoothing to Chinese Simplified due to instability.

*Please read the instruction carefully before update.
**The update action is not reversible.
***For KPXX99A/B please turn on AIS screen in SETUP menu.

Related Products

Quick View

KP-6299

Read MoreQuick View
Add to Wishlist
Quick View

KP-8299

Read MoreQuick View
Add to Wishlist
X